TRANSBELT heavy duty most durable staking belts
TRANSBELT lycra staking belts are made of heaviest but finest and most durable material and with the very resistant joins; they grant longest possible life. %-age of Lycra yarns are responsable for elasticity and life!

The heavy substance of TRANSBELTS holds the leathers inbetween upper and lower conveyor to feed them without WRINKLESS through vibration machines and assures best staking.
 
TRANSBELT Factory
 
 
TRANSBELT Sheets
 
 
The unique additional FINE weave guarantees NO MARKS, even on finest grain (especially the TRANSBELTS of BDZ-Q9612 and BZL-H-9488 materials)!

Since staking tools, open the weave of staking conveyors while staking, low quality belts with MORE OPEN WEAVE can easy cause damage to grain and it’s less elastic LYCRA fibres cannot grant satisfactory durability!
 
 
TRANSBELT Sewing
 
 
TRANSBELT Sewing
 
 
TRANSBELT Cutting
 
 
TRANSBELT staking belts are produced in following types:
 
BZL-Q DURALASTIC* SMOOTH 9612 = 670 gramm / sqmt  
 

Very fine but big volume material - most durable and elasticity in ALL directions. Duralastic conveyors are indeed LEATHER - FRIENDLY! No marking joins! Longest life!
Newest creation for optimum material at most economic advantage price! Optimum top and bottom conveyors for 3 mtr machines like: CARTIGLIANO - BAGGIO - SERIM - KELA Quatro

 
BZL-H HEAVIEST SMOOTH 9488 = 690 gramm / sqmt  
 
The heavy material assures maximum durability but at same time does the unique additional fine weave care for NO MARKS, even on finest grain !
We recommend PREMIUM SET = top BZL-H 9488 and bottom BVL-H 9483 ( SVIT - BUKE - TRE P - TURNER ).
Best experiences on 3 mtr machines with SMOOTH SET top and bottom.
Best results on SVIT MOLLISA - KELA Duo - TRE-P!
 
BEXX-L DURALASTIC° EXXTRA HEAVY SMOOTH 1279 = 945 gramm / sqmt  
 
Same 'all way' high elastic material as the above Duralastic, but evenmore volume - much more heavy - thus more elastic Lycra yarns !
Absolutly heaviest exhisting 'leather friendly' elastic material!
 
BEB-XQ MEDIUM SMOOTH 9404 = 620 gramm / sqmt  
 
Another option for conveyors for 3 mtr staking machines like KELA - CARTIGIANO – BAGGIO – SERIM. Many satisfied clients confirm 2 – 3 times longer life and better staking as known light belts.
TOP and BOTTOM in this BEB-X material.
 
BLM-L MEDIUM- LIGHT SMOOTH 9406 = 480 gramm / sqmt  
 
Good and inexpensive material still with considorable LYCRA percentage for good durability!
Cheaper alternative to BZL-H-9488.
TOP and BOTTOM conveyor in same BLM-L material.
 
BLB-L LIGHT SMOOTH 6079 = 430 gramm / sqmt  
 
Lowest price range conveyors still reasonable good quality material at very low price.
TOP and BOTTOM in this BLB-L.
 
( NO NAME ) VERY LIGHT 9606 = only 305 gramm / sqmt  
 
Some Italian Machine producers and suppliers use this very light material for their TOP and BOTTOM conveyors.
Our BLB-L LIGHT SMOOTH 6079 already is much more favourable!
 
BSL-H HEAVY STRIPED RUBBERIZED 9482 = 710 gramm / sqmt  
 
Very heavy, durable and economic material with RUBBERIZED STRIPES for better grip and good transport of leathers through the machines. Many 1.500 – 2.100 mm staking machines like MOLLISA – TRE-P – ADURA use this.
ECONOMIC SET = TOP and BOTTOM of this BSL-H stripe rubberised material.
 
BVL-H HEAVY FULLY RUBBERIZED 9483 = 850 gramm / sqmt  
 
Most heavy and most durable material with whole surface FULLY RUBBERIZED for optimum grip and best transport of leathers through the machines.This material has most durable elasticity and last for years and years!
Mostly used on MOLLISA – TRE-P – BUKE - ADURA staking machines.
Top and bottom can be both BVL-H-9483.
PREMIUM SET = BOTTOM BVL-H and TOP BZL-H smooth (no mark belt!)
 
 
TRANSBELT MATERIALS
 
BVL-H 9843 Close BVL-H 9843 BZL-H 9488
 
The table below shows the Conveyors and the Staking Machines they may be used on.
 
Staking mach 9612 BDZ-Q 9488 BZL-H 9406 BLM-L 9482 BSL-H 9488 BVL-H
CARTIGLIANO X
o
o    
BAGGIO
X
o
o    
SERIM
X
o
o    
KELA QUATRO X        
KELA DUO
o X o    
SVIT Mollisa
  o   o X
TRE-P
  o   o X
BUKE
  o   o X
TURNER Adura       o X
           
  X = most recommandable , O = also suitable
 
 
TRANSBELT IN USE
 
Vibrasoft Transbelt TRE-P Transbelt on Vibrasoft
 
Transbelt on Cartigliano

Mollisa 2

Mollisalux
 
SIZES
 
Staking conveyors have different elasticity-values for different kinds of material. Belts of heavy material require longer sizes as belts of light(er) elasticity, which is of greatest importance for easy mounting and sufficient and correct tension on the machine !

The different brand and type of machines require different sizes, which can ever defers per model. We require Non-elastic, measured CORD-SIZE of top and bottom. To get this measurement, you may simply stick a rope on the mounted belt. Let machine-belts run and wait
till the rope-begin returns to you. So you can get excat CORD-SIZE.
Pay attention to considor that tension roller-space as it's very INNER POSITION !
With the given CORD SIZES can we re-calculate the required belt size!
Due to the sensitive finishing process of elastic materials (= by chemicals, temperature and stretching as to stabilise required elasticity) there is an allowance tolerance of + or - 10%!
Please also give the width (from groove to groove) and mention the type of seam you require, just EDGE SEAM (like SVIT MOLLISA - BUKE - TRE-P) or CORD SEAM for the rope at the seams (like CARTIGLIANO, BAGGIO and SERIM). We supply endless and ready-made standard conveyors with the required edges
 
OPTION  
 
Upon request we can supply the conveyors INCLUDING P.U. elastic cord already put in the seams plus 30 cm length outside, so that you an simply mount the conveyers (with the P.U. cords) on the machine and finally tention and weld the P.U. cords to endless locally on the machine !
Also Welding unit and pincers/tweezers available!
 
TRANSBELT CONVEYORS UP TO 2100 MM WIDTH
 
ECONOMIC SET  
 
Top conveyor in BSL-H STRIPED RUBBERIZED 9482 material
Bottom conveyor in BSL-H STRIPED RUBBERIZED 9482 material
‘STRIPED’ material has the strong and resistant base-material with
every 15 cm. Rubberized stripes for good grip / transport of the leathers
through the machine.
 
 
PREMIUM SET unique ‘grain-sensitive’ and only by ZWAANS!  
 
Top conveyor in BZL-H SMOOTH 9488 material
This heavy resistant material has finest surface for maximum protection
even on most sensitive grain. Guaranteed no weave marks ! !
Bottom conveyor in BVL-H FULLY RUBBERIZED 9483 material
Also same heaviest material but whole surface fully rubberized for max.
possible grip for optimum transport of leathers through the vibration
staking machine. The additional all-over-surface rubber threads give additional strength in durability of the elasticity!
 
 
HEAVY DUTY SET  
 
Top conveyor in BVL-H FULLY RUBBERIZED 9483 material
Bottom conveyor in BVL-H FULLY RUBBERIZED 9483 material
Guarantees most durability and maximum life !
There are some machines using these belts lasting for 3 years
and more!
 
 
TRANSBELT CONVEYORS FOR 3 MTR STAKERS  
 
Our unique BZL-H HEAVY SMOOTH 9488‘ ‘grain sensitiv’ material is well approved at KELA’s Vibrasoft - CARTIGLIANO – BAGGIO – SERIM etc. The heavy strong material has very high elastic LYCRA yarn percentage to guarantee maximum durability = life !
The big sized whole hides are well hold inbetween the heavy conveyors as to assure good and wrinkles staking ! Clients with these belts confirm even over one year servicing life ! !

Our BEB-QX FINE SMOOTH 9404 material was originally developed as TOP and BOTTOM conveyors for wide staking machines like: BAGGIO – CARTIGLIANO – SERIM – KELA etc.
This medium heavy material has it’s elasticity in both directions and it has also finest surface to avoid weave marks even on fine grain.
Increase life considorable to the previous light conveyors (mach origins)!
Leathers are now better hold inbetween both heavy conveyors and give better and more wrinkless staking result !

BML-L MEDIUM SMOOTH 9406 another good medium material with considerable Lycra percentage. Also very suitable for 3 mtr. staking belts and cheaper price range.

The BLB-L LIGHT SMOOTH 6079 material is our cheapest material, but still better and more durable as many of our competitor light materials.

Upon request we can also produce 3 mtr. conveyors in the HEAVY-DUTY material as:
BZL-H + BSL-H + BVL-H. ( as for KELA + TRE-P)

Since the different materials have different elasticities we recommend you to:
Measure UNELASTIC ENDLESS LENGTH by putting a rope into the running machine, stop and put around the tension rollers. (same as the conveyors are mounted).
With these endless circumferences and width from groove to groove of upper and lower conveyor.
We can recalculate endless and suitable belt size for our durable staking belts.
 
Joins of TRANSBELT  
 
ONLY A GOOD JOIN OF BEST MECHANICAL RESISTANCE GUARANTEES LONGEST POSSIBLE
LIFE OF STAKING BELTS
 
Our 30 years experience, special sewing machines, special sewing treats etc. created the best possible joins with the maximum of mechanical resistance for LONGEST possible life and still minimum marking the leather.
To increase life of join and belt we now have developed a SPECIAL ADDITIONAL COATING of the join
to protect the sewing thread and thus the whole join on request.
This additional sealing also INCREASES THE LIFE of our high quality long life TRANSBELT conveyors!
 
TRANSBELT JOINS and Width